Helpful tips for Laying Block Paving


Whether you’re landscaping your yard or re-doing the driveway, it can be really helpful to understand the best ways to lay block paving. By taking the Do It Yourself method, you can create exactly what you desire and save yourself a fair amount of cash– something your bank balance will most likely thank you for. All you have to do is obtain the right equipment and read this quick guide.

How Will Your Paving Look?

The initial step is to determine just how you desire your block paving to look. If you’re changing old paving, what didn’t you like about it? What enhancements could you make? You must take in the total form, sensible elements (such as size) and pattern of the bricks. It’s also a smart idea to consider exactly what colour bricks will best go with your residence– you do not desire anything to clash.


Next, you’re going to wish to prepare the site. Mark out an area and dig it out, seeing to it to dig far enough down to make sure that your paving will be even with the surrounding surface. For this, you should use plant devices such as a miniature excavator or a JCB.

Set A Sub-base

Produce a sub-base to develop the structures of your block paving. Your sub-base must be at the very least 100mm thick, and it can be a smart idea to place it over a layer of weed-fabric, to prevent weeds from growing with your pavement. Finish your sub-base by going over it with a vibrating place. This will certainly squash it down and level it.

Produce Sturdy Edge Restraints

Place edge restraints to define the edge of your paving. They must be firm as well as encouraging as the outer location is the weakest part of the paving. They will additionally work as a guide for the shape of your block paving.

Begin Screeding

Next off, you’ll need to screed the location, contributing to the foundations and making a level surface area for the paving to rest on. Place about 50mm of somewhat wet sharp sand down and make use of a shaking plate once again to smooth and establish. Then put down a 2nd layer, all the same as the very first.

Laying Your Block Paving

Ultimately, you could start setting down your bricks. For the best surface, start at the bottom of an incline and go up. The joints of the bricks must overlap– much like in a wall surface– so you’ll be entrusted spaces that you’ll have to complete with cuts of brick. Once your block paving is down and all the brick are correctly positioned, sweep some kiln dried sand over the surface. This will fill the voids between the joints. See, not as well difficult! Block paving is in fact rather very easy, and could provide you outstanding results if done right. When you’ve finished, take your time to kick back and also admire all your effort- you deserve it!